Grommet / Eyelet, inner Ø12 mm / outer Ø21 mm, shiny, 2nd quality

The metal grommet is non-rusting. It is used to bump grommets piston and press, which can be found under the code 070241 or 790770.

We recommend using it on fabric a set of die-cuts . Grommets are suitable for curtains, curtains, bags, etc.

The grommets are in 2nd quality, because the color peels off from the reverse side, we do not recommend washing them.

For the riveting is suitable only the die mold and press that is listed in the description. With any different type they can not be properly attached.

Punches with a smaller diameter than the grommet should be used for elastic fabrics. For solids, the diameter of the puncher should be the same as the diameter of the grommet.

Those irregularities, leading to the inclusion in the 2nd quality are not a reason for complaint.