Eyelets with Washers for Leather inner Ø14 mm / outer Ø22 mm

The grommet allows a cord or elastic to be threaded through - it strengthens the holes. It consists of two parts. May rust when in contact with water.

Riveting is done with die mold and a press, which is under the code 070241 or 790770. For punching holes in the material, we recommend die cutter .

Use: You can use the grommet when making and decorating bags, handbags or backpacks.

For the riveting is suitable only the die mold and press that is listed in the description. With any different type they can not be properly attached.

Punches with a smaller diameter than the grommet should be used for elastic fabrics. For solids, the diameter of the puncher should be the same as the diameter of the grommet.

Not suitable for washing.