Eyelets / Grommets & Washer, inner Ø5 mm / outer Ø9.5 mm

Metal grommets strengthen the holes in the material and allow a cord or elastic to be threaded through. You can use them when making and decorating bags, handbags or backpacks. They consist of two parts. They can rust when in contact with water.

Riveting is done dies mould and a hand press, which is under the code 070241 or 790770. For punching holes in the material, we recommend a set of die-cuts .

For the riveting is suitable only the die mold and press that is listed in the description. With any different type they can not be properly attached.

Punches with a smaller diameter than the grommet should be used for elastic fabrics. For solids, the diameter of the puncher should be the same as the diameter of the grommet.

Not suitable for washing.