Metal Snap Grommet / Eyelet, inner Ø12 mm / outer Ø26 mm

The snap-in Grommets consists of two parts and has a very simple application , where you snap the legs of one part into the grooves of the other. You can help with pliers, but you can also do it manually.
You can use the grommet in the production of bags, handbags or backpacks.
Please note, that it may rust on contact with water.

We recommend using a punch set for the fabric, which can be found under code 750796.
The grommet is suitable for materials up to 2 mm thick.

Punches with a smaller diameter than the grommet should be used for elastic fabrics. For solids, the diameter of the puncher should be the same as the diameter of the grommet.

Not suitable for washing.