Grommet / Eyelet with Washer inner Ø5.5 mm / outer Ø10 mm

The grommet allows a cord or elastic to be threaded through. It consists of two parts. It doesn't rust. It is used to bump grommets die mold and press .

We recommend using die cutter or die mold for punching holes for grommets. Press for the die mold for punching holes, you can find it under the code 070241 or 790770.

Application: You can use the grommet in the field of textile production (when sewing jackets, sweatshirts, etc.).

For the riveting is suitable only the die mold and press that is listed in the description. With any different type they can not be properly attached.

Punches with a smaller diameter than the grommet should be used for elastic fabrics. For solids, the diameter of the puncher should be the same as the diameter of the grommet.