Grommet / Eyelet with Washer, inner Ø7 mm / outer Ø13 mm

The grommet allows the cord or rubber to be threaded. It consists of two parts. Stainless. The riveting piston, which can be found under code 630162, and the press, which can be found under code 630344.
For cutting holes in the fabric, you can use the die mold for punching holes and press 070241 or 790770.

Usage: Grommet you will use it mainly in the field of textile production (when sewing jackets, sweatshirts, etc.). Riveting is done by hand or with a press.

For the riveting is suitable only the die mold and press that is listed in the description. With any different type they can not be properly attached.

Punches with a smaller diameter than the grommet should be used for elastic fabrics. For solids, the diameter of the puncher should be the same as the diameter of the grommet.