Metal Grommet / Eyelet, inside Ø22 mm / outside Ø34 mm

The grommet is used to thread a cord or rubber band through. It is intended for leather haberdashery. It consists of two parts. For the attachment of grommets you will need dies mould and the press, which is under the code 070241 or 790770. For punching holes in the material we recommend Hole Puncher .

Use: You can use the grommet when making bags, handbags, sails or sewing curtains. May rust when in contact with water.

For the riveting is suitable only the die mold and press that is listed in the description. With any different type they can not be properly attached.

Punches with a smaller diameter than the grommet should be used for elastic fabrics. For solids, the diameter of the puncher should be the same as the diameter of the grommet.

Not suitable for washing.